what should I do use vortech or not?
Thread Starter
11 Second Truck Club
Joined: Nov 2001
Posts: 768
Likes: 0
From: scottsboro, al
what should I do use vortech or not? well today I bought a lunati 382 short block all forged pistons, crank and rods should I sell the supercharged shot a little gas to it and be happy or use the vortech on it. I keep hearing I want get any boost out of it is this right. thanks tony <img src="gr_stretch.gif" border="0">
Re: what should I do use vortech or not? umm, you have a stroker motor, and a blower, but you want to get rid of the blower, and get a bottle?
unless you need the $$, have a blown stroker, best of both worlds.
unless you need the $$, have a blown stroker, best of both worlds.
Re: what should I do use vortech or not? 2bseen....you gotta run that blower!!!! I just ordered the ls1edit and plan to bring it to steele next weekend and you can check it out. I still say you can do your own tuning
Thread Starter
11 Second Truck Club
Joined: Nov 2001
Posts: 768
Likes: 0
From: scottsboro, al
Re: what should I do use vortech or not? cable will you be at steele this weekend or next I like to talk to you again about the setup <img src="gr_stretch.gif" border="0">
Re: what should I do use vortech or not? NEXT weekend...I'm going to the nascar race tomorrow. Go JR #8!!!!!
I have the software already and am just awaiting the cable. Looks like I have some learning to do. First thing I'm gonna do is drop some timing and see if it shows up where I think its supposed to.
I have the software already and am just awaiting the cable. Looks like I have some learning to do. First thing I'm gonna do is drop some timing and see if it shows up where I think its supposed to.
Thread Starter
11 Second Truck Club
Joined: Nov 2001
Posts: 768
Likes: 0
From: scottsboro, al
Re: what should I do use vortech or not? good luck I hope traffic is better than it has been in the past I have waited as long a 6 hrs to get to atlanta btw go #8 and #29 I have to work so I can't go this year.
