Upping boost to 10 psi Ok well whenever I get it out of the shop that is <img src="gr_images/icons/wink.gif" border="0"> . Having timing droped 2 at wot. It should put me at 17 i think. I was running 19 before i sent out the comp(still stock tuning). I can run 7psi on the street with 94 octane but I figure that is getting close. So 10psi will probably be a track only type deal unless i can find a place that sells 100 out here. |
Re: Upping boost to 10 psi Good luck <img src="gr_stretch.gif" border="0"> I was able to run 10+ on 100 octane and 16° mid range, then ramping to 21° by 6200 And from what i've found so far in the motor, things were doing well. <img src="gr_grin.gif" border="0"> |
Re: Upping boost to 10 psi Thats good to hear <img src="gr_stretch.gif" border="0"> |
Re: Upping boost to 10 psi I'm guessing 10 is ok, but i was pushing over that on many occasions. I've tested the durabity of the head gaskets, and i was getting close to the edge <img src="gr_stretch.gif" border="0"> http://harlan.sketchy.net/teardown/107-0709_IMG.JPG http://harlan.sketchy.net/teardown/107-0713_IMG.JPG funny thing is, it was only the middle cylinders. And i never got into the coolant. Oh well <img src="gr_grin.gif" border="0"> |
Re: Upping boost to 10 psi [quote]Originally posted by Cool28: <strong>I can run 7psi on the street with 94 octane but I figure that is getting close.</strong><hr></blockquote> Do you know what your power level was at 7psi? Either that or the mass flow? I am really close to giving Cartek a call to get larger injectors, up the boost to 6.5 - 7, and have them tune it with thier LS1 edit. |
Re: Upping boost to 10 psi I dont know the hp numbers but its hella fun when you hit the gas <img src="gr_stretch.gif" border="0"> . I'm running about 75psi(fuel press) at full boost. I figure anyway. Ordered my FP gauge today <img src="gr_stretch.gif" border="0"> . I also have #42 injectors. Which I think should be a must. I think 10psi and #42 injectors will be fine for my car. |
Re: Upping boost to 10 psi I was ramping up to 28' with 10psi on the topend and starting with 24' with 7psi in the midrange.Stock compression. Water/alky system <img src="gr_images/icons/wink.gif" border="0"> Steve |
Re: Upping boost to 10 psi At least you know if anything goes wrong with the turbos you can quickly get them replaced under warranty... |
Re: Upping boost to 10 psi WOW what would we do without you <img src="images/icons/rolleyes.gif" border="0"> |
Re: Upping boost to 10 psi |
All times are GMT -5. The time now is 05:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands