Anyone using Alky inj ?
TECH Addict
Joined: Nov 2001
Posts: 2,659
Likes: 1
From: Bellevue, Wa
Re: Anyone using Alky inj ? I will be once I get my damn fuel pressure to stop dropping like a rock. I built a custom system with help from just_me. It's sitting there begging to be activated but the friggen fuel system isn't quite right yet.
TECH Regular
Joined: Feb 2002
Posts: 414
Likes: 0
From: the moon
Re: Anyone using Alky inj ? I just built and tested my new system yesterday.
The single nozzle system worked so well last year I decided to build a serious system using 4 misting nozzles for better atmomization.
It's a inline 4 nozzle system plumbed right after the blower operating at 90psi.
I'm flowing 11 ounces in 15 seconds.
Pure liquid intercooling, no aftercooler.
And the less restrictive plumbing makes great boost as I had no trouble getting 11psi with heads/cam/headers with the G-trim.
Charge temps as low as most any intercooler PLUS the awesome anti detonation control and combustion cooling of water + alcohol.
It adds complexity to your motor but if you can handle and understand it, it's well worth the effort.
Lot's of good information over at www.turbobuick.com
Just Me Steve
The single nozzle system worked so well last year I decided to build a serious system using 4 misting nozzles for better atmomization.
It's a inline 4 nozzle system plumbed right after the blower operating at 90psi.
I'm flowing 11 ounces in 15 seconds.
Pure liquid intercooling, no aftercooler.
And the less restrictive plumbing makes great boost as I had no trouble getting 11psi with heads/cam/headers with the G-trim.
Charge temps as low as most any intercooler PLUS the awesome anti detonation control and combustion cooling of water + alcohol.
It adds complexity to your motor but if you can handle and understand it, it's well worth the effort.
Lot's of good information over at www.turbobuick.com
Just Me Steve
