Fuel systems
Thread Starter
Staging Lane
Joined: Apr 2002
Posts: 56
Likes: 0
From: Fort Worth
Fuel systems Hi, does anyone have any pics of their upgraded fuel systems the can post or email me. It's that time for my car I know I'm going with the aeromotive 1000 hp external -10 feed line and -6 return line. Not quit sure though about what I need to do at the fuel rails and what to do with my fairly new fuel pressure regulator. BTW it is an LT1. Any help would be great. Thanx.
Re: Fuel systems I've got my fuel system pics here. Drop me an email if you have any specific questions.. brady_96z@yahoo.com <img border="0" alt="[chug]" title="" src="graemlins/gr_chug.gif" />
__________________
1966 Chevy II twin turbo LS3 project
2016 Z07 Carbon
1966 Chevy II twin turbo LS3 project
2016 Z07 Carbon
Thread Starter
Staging Lane
Joined: Apr 2002
Posts: 56
Likes: 0
From: Fort Worth
Re: Fuel systems Man, thanks for the pics. Your setup looks good,maybe a little complicated when it comes to the fuel rails but doable. I'll need to find someone with a tig. But I'm sure I need a system similar to yours. Again thanks.
Re: Fuel systems fyi speed inc sells billet rails and a balance connection on their website, they have the line that you need to connect it to the tank as well. check it out.
Thread Starter
Staging Lane
Joined: Apr 2002
Posts: 56
Likes: 0
From: Fort Worth
Re: Fuel systems Guys, instead of buying a fuel sump like Brady's; why can't I just drill a -10 hole in the lowest point in the fuel tank and run a -10 line to the suction side of the pump? Will there be flow problems. Thanks for any replies.
Justin
Justin
