Gary, how goes the quest for completing your kit?
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Nov 2001
Posts: 1,356
Likes: 0
From: Northridge, CA
Gary, how goes the quest for completing your kit? Just wondering on the status of the housings and stuff that you ordered a while ago.
I'm sure that you will be there soon.
Scott
I'm sure that you will be there soon.
Scott
TECH Fanatic
Joined: Nov 2001
Posts: 1,190
Likes: 0
From: Las Cruces, NM
Re: Gary, how goes the quest for completing your kit? I got my two standard compressor housings TO4Bs from Limit Engineering, went on vacation then came back to find a box from Tom. He sent me the passenger side compressor housing (inlet parallel to outlet) actuator brackets, air cleaner brackets, and the two exhaust pipes. So the only thing I am missing is the y-pipe. So its looking pretty good. That should not be to hard to make. I have a weldon differential pump, 50 lb injectors, ls1-edit, the wideband o2. So now just have to get off my butt and get everything installed. Hows your setup doing?
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Nov 2001
Posts: 1,356
Likes: 0
From: Northridge, CA
Re: Gary, how goes the quest for completing your kit? That is great news!
I know that Tom is trying to leave as few people hanging as possible...sounds like you are almost there, that's great.
Car is apart right now because I am also too lazy to finish wiring up the converter for the injectors. Should be finished today though.
Scott
I know that Tom is trying to leave as few people hanging as possible...sounds like you are almost there, that's great.
Car is apart right now because I am also too lazy to finish wiring up the converter for the injectors. Should be finished today though.
Scott
TECH Fanatic
Joined: Nov 2001
Posts: 1,190
Likes: 0
From: Las Cruces, NM
Re: Gary, how goes the quest for completing your kit? I got the driver side turbo, exhuast and actuator assembled and adjusted. Should get the passenger side stuff done here shortly. Its nice with the PA k-member dont have to remove anything to install the manifolds. I have had them on and off the car so many times to adjust for fitment problems and figuring out the clocking on the turbos.
Yeah I have to wire up the gauges, the wideband, the oil pump, and the stage II computer it will probably take longer to do the wiring than everything else.
Gary
Yeah I have to wire up the gauges, the wideband, the oil pump, and the stage II computer it will probably take longer to do the wiring than everything else.
Gary
