Anybody need a 7psi pulley?
Anybody need a 7psi pulley? I just made up some ATI pulleys and ive got a few extra to sell. I have qty2 7psi (3.4" diameter) pulleys to sell. The price is 50 each plus 7 for shipping anywere in the USA.
Email:
Camarogod98@hotmail.com
Email:
Camarogod98@hotmail.com
Re: Anybody need a 7psi pulley? I do. I just sent you an e-mail. Are these pulleys home made? Do you run them on your own car? Anybody else using these pulleys? <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Re: Anybody need a 7psi pulley? <img border="0" alt="[pimp]" title="" src="graemlins/gr_pimp.gif" />
these pulleys are made on a $150,000 lathe so i dont consider them homemade.
i run these pullies on my camaro making 12psi of boost and they work perfect. I just sold a set of 4 to a guy and he loved them because the quality is so good and they are pretty cheap.
do you have a steel idler yet? you might as well change that out when you get your new pulley
these pulleys are made on a $150,000 lathe so i dont consider them homemade.
i run these pullies on my camaro making 12psi of boost and they work perfect. I just sold a set of 4 to a guy and he loved them because the quality is so good and they are pretty cheap.
do you have a steel idler yet? you might as well change that out when you get your new pulley
Re: Anybody need a 7psi pulley? I just sent you an e-mail. I'd like to get a 7psi pulley from you! Please check your e-mail! I already have my car apart > so I'm looking to do this asap! Thanks Jay!
TECH Enthusiast
Joined: Sep 2002
Posts: 658
Likes: 0
From: Clinton Twp. Michigan
Re: Anybody need a 7psi pulley? Which head unit are you using this pulley on that you are getting 7 psi out of it? on a D1-SC i get that much boost out of my 4 and 3/8" pulley, the 3.4" pulley, would be more like 15/16+ psi on a D1, sine a 4" should be around 12, i take it that you are speaking of on a P1? Are you going to make larger 6 rib balancer pullies, or when are you going to have a price and release time for the 8-rib setup.
Jason
<small>[ December 02, 2002, 09:02 PM: Message edited by: ZYA_LTR ]</small>
Jason
<small>[ December 02, 2002, 09:02 PM: Message edited by: ZYA_LTR ]</small>
