Intercooler Installation Problems
Thread Starter
Teching In
Joined: Dec 2002
Posts: 1
Likes: 0
From: California
Intercooler Installation Problems I know this forum is LS1 territory, however I was hoping that some here could possibly help. I am having a great deal of difficulty installing the twin flow intercooler system from ATI on my '97 Trans Am. Some of the parts are too short,others arent't the correct angle and others just don't fit. ATI claims I have the right parts and they should fit yet I know it will take quite a bit of fabricating to complete the job properly. Any comments or suggestions would be welcome.
Moderator
Joined: Nov 2001
Posts: 3,048
Likes: 12
From: Raleigh, NC
Re: Intercooler Installation Problems Larry, I wish we could help. But, most of us that have put hte intercoolers on have done it on a '98 or above F-Body.
Go to my site, www.BlackLS1TA.com , and look at the Installs section. Maybe that and your manual will give you some ideas.
Good luck!
Go to my site, www.BlackLS1TA.com , and look at the Installs section. Maybe that and your manual will give you some ideas.
Good luck!
