ozzykicks2002

Well I just got this controller and me and the tuner are still trying to figure it all out! its really in depth almost too much! well what is the best way to start dialing the boost in? start with the boost or the overboost setting and how do you know when you need to change the SENS or not? either post or please PM me! going to try tyo make some big numbers this weekend if we figure it all out!

MECHAM

iTrader: (4)

set the overboost first!!!

if yr dialing for 10psi..set the overboost 2.5psi above

then work with the boost setting to get your boost to where u want it..

then if u need to...adjust the sens and/or gate pressure..

ozzykicks2002

So the e boost 2 has 4 settings for each boost group?
so if I set it to bg1 that has the settings for
sens
overboost
gate pressure
and boost?

onfire

iTrader: (17)

That's correct. Don't take this wrong, but the manual is pretty good with the EBoost 2. I read mine a couple of times and made notes on the four items you listed above....then programmed away...the more you play with it the easier it gets. I do keep an extra copy of the manual in the car to keep track of the buttom sequence.