Tossing belts with Incon TT?
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Nov 2001
Posts: 1,356
Likes: 0
From: Northridge, CA
Tossing belts with Incon TT? Guys,
Just thought this might help someone.
In the past I have had some minor belt problems when running more then 7.5psi of boost. Ocassionally the main belt would pop off a few teeth, and only 3 ribs would be on the tensioner.
I bought a Katech billet tensioner and it seems to have solved this problem, I haven't seen the belt move at all...even at ~10psi.
Thanks,
Scott
Just thought this might help someone.
In the past I have had some minor belt problems when running more then 7.5psi of boost. Ocassionally the main belt would pop off a few teeth, and only 3 ribs would be on the tensioner.
I bought a Katech billet tensioner and it seems to have solved this problem, I haven't seen the belt move at all...even at ~10psi.
Thanks,
Scott
Tire Smoking Tranny Blowing Director
iTrader: (2)
Joined: Nov 2001
Posts: 2,130
Likes: 1
From: Barto PA
Re: Tossing belts with Incon TT? Ya that what happened to me. I just bought a new stocker and hasnt happened since. IT did it to me once when I was driving in pouring down freezing rain. Took me a hr since I couldnt see and didnt have the right wrench lol.
