FS: Tech edge ver 1.5 wideband controller/NTK sensor
Thread Starter
8 Second Club
iTrader: (34)
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
FS: Tech edge ver 1.5 wideband controller/NTK sensor Figured I'd post this here instead of the FS section since this is where the supercharged people are..
Anyhow, I have an assembled tech-edge vesion 1.5 wideband controller with the NTK sensor. This was a kit assembled and calibrated by me (25yrs of electronic experience) and works fine. There is a problem with the firmware on the attiny chip that causes it to freak out once in a while but that will be fixed and is a simple plug in chip replacement when they fix it. These log RPM, a/f, and two 0-5v voltage inputs on a palm, I used a 50.00 M105 Palm with it.
http://www.techedge.com.au/vehicle/wbo2/default.htm for info.
you can read about the firmware problem and soon to be released fix here:
http://autos.groups.yahoo.com/group/oz-diy-wb/
I want 200.00 for the controller, sensor and 6' sensor cable (sensor has some damage on the threads but works/screwn in fine), the sensor alone cost 150.00. Sensor has ~10hrs on it and has never been left in a car, dyno and tuning blasts only. If you are handy with electronics and have a supercharger this is a cool thing to have, it is suprisingly accurate and the rpm logging is nice to have. If interested shoot me an e-mail, otherwise it goes into the crawlspace of no return soon <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Anyhow, I have an assembled tech-edge vesion 1.5 wideband controller with the NTK sensor. This was a kit assembled and calibrated by me (25yrs of electronic experience) and works fine. There is a problem with the firmware on the attiny chip that causes it to freak out once in a while but that will be fixed and is a simple plug in chip replacement when they fix it. These log RPM, a/f, and two 0-5v voltage inputs on a palm, I used a 50.00 M105 Palm with it.
http://www.techedge.com.au/vehicle/wbo2/default.htm for info.
you can read about the firmware problem and soon to be released fix here:
http://autos.groups.yahoo.com/group/oz-diy-wb/
I want 200.00 for the controller, sensor and 6' sensor cable (sensor has some damage on the threads but works/screwn in fine), the sensor alone cost 150.00. Sensor has ~10hrs on it and has never been left in a car, dyno and tuning blasts only. If you are handy with electronics and have a supercharger this is a cool thing to have, it is suprisingly accurate and the rpm logging is nice to have. If interested shoot me an e-mail, otherwise it goes into the crawlspace of no return soon <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
