that looks wicked. very nice man 
New Bell TT Intercooler pics
Thread Starter
Coal Mining Director
iTrader: (17)
Joined: Nov 2001
Posts: 4,442
Likes: 0
From: Virginia
New Bell TT Intercooler pics I sent Gerhard drawings last Tuesday and it arrived today. Super quality...pics don't do the welds justice. Core is 10 x 30 x 4.5 vertical flow...1323 cfm at 1psi drop...overall height is 14.50 inches...bolted it in tonight ...tight,tight,tight fit but it fits....need to do some fab and coupler work this weekend....weighs 35 lbs. I hope it drops my IAT's to 30 over ambient. Baby Incon IC in the pic is up to 100 over ambient at 16psi at 130mph.
Thread Starter
Coal Mining Director
iTrader: (17)
Joined: Nov 2001
Posts: 4,442
Likes: 0
From: Virginia
Originally Posted by Moparnos (The SLP Guy)
wow looks really good. how much?
Pick your poison: http://www.bellintercoolers.com/pages/aachart450.html
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Thread Starter
Coal Mining Director
iTrader: (17)
Joined: Nov 2001
Posts: 4,442
Likes: 0
From: Virginia
Originally Posted by slow
looks great.
Do you want to sell the incon IC's, or any other parts your replacing of the kit? I'm trying to piece one together.
Thanks
Ryan
Do you want to sell the incon IC's, or any other parts your replacing of the kit? I'm trying to piece one together.
Thanks
Ryan
Thread Starter
Coal Mining Director
iTrader: (17)
Joined: Nov 2001
Posts: 4,442
Likes: 0
From: Virginia
Originally Posted by CHRISPY
Wow that looks awesome man and amazing turn around time.
That is how a company should be run!
Do you have pics of it mounted?
That is how a company should be run!
Do you have pics of it mounted?
Thread Starter
Coal Mining Director
iTrader: (17)
Joined: Nov 2001
Posts: 4,442
Likes: 0
From: Virginia
Originally Posted by smokinHawk
nice, but i would have tried to get the end caps bigger
it would help it cool down a little more.
it would help it cool down a little more.
We actually looked at dropping the core height to pick up end tank height, but it was a horrible trade-off in the thermal model.....without getting geeky, you want all the flow core that you can get for thermal efficiency...obviously there is a balance in pressure drop vs core flow length vs core thickness vs thermal eff vs core width.....this one was thermal modeled primarily and pressure drop secondarily since I had plenty of core width and depth to flow 1300cfm at 1si drop. I would have given up some of the 1300cfm for more thermal eff since my Incons max at 1100 cfm.... there's a thermal "trick" in the feed tanks in the pic..
Originally Posted by LASTLS1
They are really on top of thier work!!! They get it DONE!!! Did PSJ ever get his from Griffin?
Not that i know of... today was the dead line for him having a tracking # or he cancling his order..........
We will see.
Awsome man. Turned out awsome.
Kyle
