New 10 Rib 'Vette Blower Mt. From ECS
Thread Starter
Staging Lane
Joined: May 2006
Posts: 62
Likes: 0
From: Texas,U.S.A.
New 10 Rib 'Vette Blower Mt. From ECS Today we recieved part of the new 10 rib Corvette Procharger mounting system. This is way long overdue in my opinion. We are about to install a new 427 in my C-5. Our shop has been a long time Procharger booster but we have been looking hard at Turbo's. Lot's of power,no pulleys or belts.Thought i'd get the 427 running with an F1-C or R & get a tune then make up my mind about the final setup. No more indecision! The ECS kit( part has shipped,about 2 weeks on the rest Chris said) is the best machine work imaginable. I have been running a Bridgeport for 28 years. No personal claims of being a master machinist but you can rest assured this is as good as machine work gets. The polish work is just beautiful with attention to detail. 10 ribs is what we have always needed! They resized the lower drive pulley so you can run a bigger compressor pulley & along with that awesome tensioner will keep that belt on & tight. No more belt problems,alignment, breakage etc... This 10 RIB looks like the answer to my FI needs. Sorry but no pictures. This is only the second kit so somebody will have some soon. I guess everybody already knows they are very nice people to do business with. THANKS ECS!!
Last edited by msb184; Jun 6, 2006 at 07:39 PM. Reason: left something out
On The Tree
Joined: Aug 2005
Posts: 132
Likes: 0
Originally Posted by msb184
Today we recieved part of the new 10 rib Corvette Procharger mounting system. This is way long overdue in my opinion. We are about to install a new 427 in my C-5. Our shop has been a long time Procharger booster but we have been looking hard at Turbo's. Lot's of power,no pulleys or belts.Thought i'd get the 427 running with an F1-C or R & get a tune then make up my mind about the final setup. No more indecision! The ECS kit( part has shipped,about 2 weeks on the rest Chris said) is the best machine work imaginable. I have been running a Bridgeport for 28 years. No personal claims of being a master machinist but you can rest assured this is as good as machine work gets. The polish work is just beautiful with attention to detail. 10 ribs is what we have always needed! They resized the lower drive pulley so you can run a bigger compressor pulley & along with that awesome tensioner will keep that belt on & tight. No more belt problems,alignment, breakage etc... This 10 RIB looks like the answer to my FI needs. Sorry but no pictures. This is only the second kit so somebody will have some soon. I guess everybody already knows they are very nice people to do business with. THANKS ECS!!
I'm interested in this... Who makes this kit? I don't know who "ECS" is...
Thanks
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
