Need dyno #'s for TTi street kit for WS6
Thread Starter
Launching!
Joined: Aug 2004
Posts: 284
Likes: 0
From: British Columbia, Canada
Need dyno #'s for TTi street kit for WS6 I am interested in this kit. I have searched and have had no luck in locating any before/after dyno #'s. Basically my car just had lid/exhaust.
Any help would be appreciated.
Thx
Any help would be appreciated.
Thx
https://ls1tech.com/forums/showthrea...eferrerid=6348
https://ls1tech.com/forums/showthrea...eferrerid=6348
https://ls1tech.com/forums/showthrea...eferrerid=6348
https://ls1tech.com/forums/showthrea...eferrerid=6348
https://ls1tech.com/forums/showthrea...eferrerid=6348
this is just reading the first page of searching... tti street kit dyno
https://ls1tech.com/forums/showthrea...eferrerid=6348
https://ls1tech.com/forums/showthrea...eferrerid=6348
https://ls1tech.com/forums/showthrea...eferrerid=6348
https://ls1tech.com/forums/showthrea...eferrerid=6348
this is just reading the first page of searching... tti street kit dyno
Thread Starter
Launching!
Joined: Aug 2004
Posts: 284
Likes: 0
From: British Columbia, Canada
I apprciate that, but was looking for basically stock.....everyone has built engines or cam/heads etc. 5-7 PSI, not 11 or 17 etc.....
The one guy made 444/475...that's what I am looking for. Now to find the graph on that one.
Thx
The one guy made 444/475...that's what I am looking for. Now to find the graph on that one.
Thx
StoleIt is making 450/475 with his kit. Stock engine.
Check the boosted list sticky for more on his setup.
I will have the same kit on my car within a couple weeks if all goes well. We will see how it does.
Check the boosted list sticky for more on his setup.
I will have the same kit on my car within a couple weeks if all goes well. We will see how it does.
