FS:25.2 camaro roller
FS:25.2 camaro roller I know this isn't the forsale sec. but this is 100% FI related seeing as you guys are the only ones that would need a chassis like this..
2000 SS red paint in good condition 40k on the OD.
Billingsley fab 9in shortened 3in per side.40 spline strange gun drilled axles,aluim center section,light weight ger set with a wolfe dual anti swaybar welded on.Powder coated gloss black.
Holeshot wholestar rear wheels 15by12in WITH BEADLOCK ring.
there are 29.5 10.5 s MT's on them
aluma star 1 peice front wheels with goodyear tires
Stange dual rear brakes.(A must for a turbo car) 80miles on them
strange front brakes 80miles on them
BMR k-mem and lower control arms
Wolfe t-arm,offset rear control arms,phr.
VFN pin on hatch,and rear clip NIB
LEXAN windows for the front and rear NIB
Joe Vanoverbeek light weight carbonfiber hood NIB
Joe van o prostock wing.clear carbon woven 15in. NIB
here's a description of the chassis.:
It's a stock floor pan 25.2 cage.good to 6.50 in the 1/4.It has been mini tubed as far as it will go keeping stock susp.It has a kirkey mounted as far back as possible and still legal.I also had him put bars thru the firewall and across the shocktower then onto the frame rail.
I need to go get some pics taken..I have a few but nun of the finished product.
With all that being said,I'm not going to sell it less than 27k.
2000 SS red paint in good condition 40k on the OD.
Billingsley fab 9in shortened 3in per side.40 spline strange gun drilled axles,aluim center section,light weight ger set with a wolfe dual anti swaybar welded on.Powder coated gloss black.
Holeshot wholestar rear wheels 15by12in WITH BEADLOCK ring.
there are 29.5 10.5 s MT's on them
aluma star 1 peice front wheels with goodyear tires
Stange dual rear brakes.(A must for a turbo car) 80miles on them
strange front brakes 80miles on them
BMR k-mem and lower control arms
Wolfe t-arm,offset rear control arms,phr.
VFN pin on hatch,and rear clip NIB
LEXAN windows for the front and rear NIB
Joe Vanoverbeek light weight carbonfiber hood NIB
Joe van o prostock wing.clear carbon woven 15in. NIB
here's a description of the chassis.:
It's a stock floor pan 25.2 cage.good to 6.50 in the 1/4.It has been mini tubed as far as it will go keeping stock susp.It has a kirkey mounted as far back as possible and still legal.I also had him put bars thru the firewall and across the shocktower then onto the frame rail.
I need to go get some pics taken..I have a few but nun of the finished product.
With all that being said,I'm not going to sell it less than 27k.
