How do these bearings look?
Thread Starter
Joined: Sep 2003
Posts: 232
Likes: 0
From: Monmouth County, NJ
How do these bearings look? Hey I just got in my ARP pro series rod bolts and I didn't think to look at the bearings till now so I wanted to know if this looked normal and would probably be alright? It's going to be a stock shortblock and i'm going to push it as far as I can get away with. I don't plan to be running a stock shortblock for more than maybe a year or less. I'm only asking here because i'll be boosting this motor.
Also if I should replace them what are the boosted guys running? I was thinking the Clevite 77 H in Standard size?
Only took a picture of 1 of them since they pretty much all like exactly like this.
Clicking the picture will bring up the clearer view of it. If anyone thinks this really doesn't belong here move it I guess.
Also if I should replace them what are the boosted guys running? I was thinking the Clevite 77 H in Standard size?
Only took a picture of 1 of them since they pretty much all like exactly like this.
Clicking the picture will bring up the clearer view of it. If anyone thinks this really doesn't belong here move it I guess.
Thread Starter
Joined: Sep 2003
Posts: 232
Likes: 0
From: Monmouth County, NJ
Yeah these are the stockers. 50k miles on it I was told. The bearings are still pretty thick but I didn't know what the markings meant. So I should probably order new ones I take it. The crank looks fine. Not scored annd smooth.
Thread Starter
Joined: Sep 2003
Posts: 232
Likes: 0
From: Monmouth County, NJ
I think i'm just going to get new bearings. Its only going to be about 70 dollars why not.
These look good?
http://store.summitracing.com/partde...5&autoview=sku
These look good?
http://store.summitracing.com/partde...5&autoview=sku
