TT pipes back from the coater.
Thread Starter
Coal Mining Director
iTrader: (17)
Joined: Nov 2001
Posts: 4,442
Likes: 0
From: Virginia
TT pipes back from the coater. Originally was a Speed Inc one piece y pipe. Great work by Jim Moran.
I sectioned it into 3 pieces with V bands plus added a cutout. Now it's twin 2.75 pipes going into a 3.50 single and out a 3.50 electric cutout......or through a 3.0 to a Borla with SLP tips.
Then had it coated with the special sauce....
Time to get to work
I sectioned it into 3 pieces with V bands plus added a cutout. Now it's twin 2.75 pipes going into a 3.50 single and out a 3.50 electric cutout......or through a 3.0 to a Borla with SLP tips.
Then had it coated with the special sauce....
Time to get to work
Thread Starter
Coal Mining Director
iTrader: (17)
Joined: Nov 2001
Posts: 4,442
Likes: 0
From: Virginia
Thanks Jeff. With that monster that you built, you know these things take some time and effort.
I had Bell build me a vertical flow IC with a 4.5" thick by 10" tall by 30" wide core....now add the endtanks and it took some fabbing to mate it to the Speed Inc kit....and to get it mounted under the fascia
I had Bell build me a vertical flow IC with a 4.5" thick by 10" tall by 30" wide core....now add the endtanks and it took some fabbing to mate it to the Speed Inc kit....and to get it mounted under the fascia
TECH Addict
Joined: Aug 2004
Posts: 2,866
Likes: 4
Originally Posted by onfire
Thanks Jeff. With that monster that you built, you know these things take some time and effort.
I had Bell build me a vertical flow IC with a 4.5" thick by 10" tall by 30" wide core....now add the endtanks and it took some fabbing to mate it to the Speed Inc kit....and to get it mounted under the fascia
I had Bell build me a vertical flow IC with a 4.5" thick by 10" tall by 30" wide core....now add the endtanks and it took some fabbing to mate it to the Speed Inc kit....and to get it mounted under the fascia
Chris.
Trending Topics
I did'nt know that you've switched from Incon's to SpeedInc's. Is it a complete kit or are you kind of combining them? co'z it looks like you're using the Incon's pressure side hoses. That's very nice! Can you share the specs on your turbo's? is it a 61 or 67mm compressor wheel? BB? E or S cover? is it a .63ar turbine? I'm assuming that they're bigger(cfm) than the Incon units? sorry for all these questions. btw, that's some bling, bling you'll have under your car!
Last edited by Boo"SS"t; Mar 24, 2007 at 12:17 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by Navy David SS
Why didn't you coat the hot parts them same?
David
David
Unfortunately it doesn't stand up to the extreme temperatures on turbo cars that the high-temp black does.
Thread Starter
Coal Mining Director
iTrader: (17)
Joined: Nov 2001
Posts: 4,442
Likes: 0
From: Virginia
Originally Posted by Navy David SS
Very nice exhaust. Why didn't you coat the hot parts them same? Still looks great.
David
David
Thread Starter
Coal Mining Director
iTrader: (17)
Joined: Nov 2001
Posts: 4,442
Likes: 0
From: Virginia
Originally Posted by Boo"SS"t
I did'nt know that you've switched from Incon's to SpeedInc's. Is it a complete kit or are you kind of combining them? co'z it looks like you're using the Incon's pressure side hoses. That's very nice! Can you share the specs on your turbo's? is it a 61 or 67mm compressor wheel? BB? E or S cover? is it a .63ar turbine? I'm assuming that they're bigger(cfm) than the Incon units? sorry for all these questions. btw, that's some bling, bling you'll have under your car!
It's a Johnny Cash kit...
Speed Inc (Jim Moran) is the heart of the kit with his custom built manifolds. I modified his down pipes as shown in the pic...but that's just me...his one piece is fine.
My custom built IC, I fabbed the pressure pipes from Incon and RacePartSolution pieces. I fabbed one cold side pipe and used 1/2 of Jim's cold side pipe....again Jim's stuff is great...I just made some stuff my way to mate my custom IC, etc..
GT35R turbos. 60lb/min. TO4E covers BB
Incon sytem is great BTW...ran 9.9 at 141mph with 44lb/min turbos and 3800lb raceweight....
I'm not going to push this system....added a custom interior that added about 50 more lbs to the car and needed a little extra power to offset it.
Originally Posted by onfire
It's a Johnny Cash kit...
I'm not going to push this system....
I'm not going to push this system....
Liar
Intercooler looks HUGE.
That turbine housing is huge compared to the incon...oughta flow a lot of hosspowahs!!!
Originally Posted by ninetres
There is a BIG TIME coating company that is local to me. They coated my hot parts. They have fancy cerama-krome coating that looks very similar to the exhaust in this thread.
Unfortunately it doesn't stand up to the extreme temperatures on turbo cars that the high-temp black does.
Unfortunately it doesn't stand up to the extreme temperatures on turbo cars that the high-temp black does.
2nd thing is the black isnt really any diff.
I do Ceramic coatings and thermal coatings also and the Black is a basecoat of the same silver just with a top coat of black.
I use Turbo X and have done numerous turbo housings and suck with NO problem.
guys been running these for 3-4years now and says they look good as day 1
BTW thats my wifes SMIR.ICE so lay off...lol
MOD EDIT *please no direct links to a nonsponsored site*
Last edited by frcefed98; Mar 24, 2007 at 11:19 PM.
Originally Posted by FSTFBDY
1st id like to say AWESOME SETUP.
2nd thing is the black isnt really any diff.
I do Ceramic coatings and thermal coatings also and the Black is a basecoat of the same silver just with a top coat of black.
I use Turbo X and have done numerous turbo housings and suck with NO problem.
guys been running these for 3-4years now and says they look good as day 1
BTW thats my wifes SMIR.ICE so lay off...lol
2nd thing is the black isnt really any diff.
I do Ceramic coatings and thermal coatings also and the Black is a basecoat of the same silver just with a top coat of black.
I use Turbo X and have done numerous turbo housings and suck with NO problem.
guys been running these for 3-4years now and says they look good as day 1
BTW thats my wifes SMIR.ICE so lay off...lol
Believe me, the folks I am talking about are VERY experienced. I initially wanted the chrome stuff but they talked me out of it. They also charge a little more for the cerama-krome, so I'm sure if it held up the same hey would have sold me on it.
Last edited by frcefed98; Mar 24, 2007 at 11:19 PM.
What Company is it? Either way IF it is some SPECIAL silver/Black that cost more thats cool. Id like to know what it is.
Ive never had anything Ive done in silver on turbo stuff burn off etc. :knockonwood: Im not sayin they don't have a good product or anything just lettin ya know the "other silver" stuff is just fine in the turbo world too...
Ive never had anything Ive done in silver on turbo stuff burn off etc. :knockonwood: Im not sayin they don't have a good product or anything just lettin ya know the "other silver" stuff is just fine in the turbo world too...
Originally Posted by FSTFBDY
What Company is it? Either way IF it is some SPECIAL silver/Black that cost more thats cool. Id like to know what it is.
Ive never had anything Ive done in silver on turbo stuff burn off etc. :knockonwood: Im not sayin they don't have a good product or anything just lettin ya know the "other silver" stuff is just fine in the turbo world too...
Ive never had anything Ive done in silver on turbo stuff burn off etc. :knockonwood: Im not sayin they don't have a good product or anything just lettin ya know the "other silver" stuff is just fine in the turbo world too...
