Vortech SC for LT1
Thread Starter
TECH Enthusiast
Joined: May 2006
Posts: 631
Likes: 0
From: Metairie, LA
Vortech SC for LT1 I was looking at the vortech superchargers w/ aftercooler for LT1s. I believe it is an a-w ic. The piping is made of steel and aluminum. Any thoughts, opinions or experience with these systems?
You are right - it is A2W. There are people on here that have had good luck with it, I believe getting into the 10's and into the 600+rwhp area.
You are not locked into an A2W with a Vortech - I did a custom A2A and it came out well.
Jim
You are not locked into an A2W with a Vortech - I did a custom A2A and it came out well.
Jim
TECH Addict
Joined: Jul 2005
Posts: 2,153
Likes: 3
I had a Vortech T-trim kit with the Vortech aftercooler. With the 6.66/2.75 pulley combo, I made 13 psi on a 383 and ran 10.40 at 133 at full weight.
Many people are down on that intercooler, but I eventually made almost 700 rwhp through and auto/loose converter with the Vortech aftercooler and a turbo.
Mike
Many people are down on that intercooler, but I eventually made almost 700 rwhp through and auto/loose converter with the Vortech aftercooler and a turbo.
Mike
