TTi Race kit DONE!
TTi Race kit DONE! Well all of the parts came back from coating today! here are some new Pictures:
Topside
BOV (Tial 50MM)
Charge pipe from Turbo to Intercooler 3" Ceramic coated
Charge pipe also you can see the Tial 44mm Wastegate
4" Ceramic coated downpipe with 4" v-band flanged cutout
4" Downpipe to 3" intermediate pipe
Should hit the dyno this weekend?
Topside
BOV (Tial 50MM)
Charge pipe from Turbo to Intercooler 3" Ceramic coated
Charge pipe also you can see the Tial 44mm Wastegate
4" Ceramic coated downpipe with 4" v-band flanged cutout
4" Downpipe to 3" intermediate pipe
Should hit the dyno this weekend?
Trending Topics
Originally Posted by smokinHawk
nice how hard is it to install that 4" downpipe, mine is a little pain, i have to take the steering rack out a little cause of the vband clamps.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
looks great, i wouldnt mind putting my w/g back to the dp one day.. half the time i like it loud, half not.
its cool that the 4" fit that k member/mount combo.. is the housing 4"?
dont forget to cut the rest of that alternator bracket post off. and i have gone through a couple reman alternators since 2004 when they did the first race kit for me & i HIGHLY reccomend wrapping that header. george put some on mine originally and it got cruddy and i removed it and started losing alternators.
i am pretty certain you can get an elbow and a filter on there just like what i have if interested
its cool that the 4" fit that k member/mount combo.. is the housing 4"?
dont forget to cut the rest of that alternator bracket post off. and i have gone through a couple reman alternators since 2004 when they did the first race kit for me & i HIGHLY reccomend wrapping that header. george put some on mine originally and it got cruddy and i removed it and started losing alternators.
i am pretty certain you can get an elbow and a filter on there just like what i have if interested
