boost takes out another lucky #7
hahah thankfully the ls1 engine harness is sooo impossible to screw up
here is a good vid of that days ensuing fun
http://www.youtube.com/watch?v=zzg5siwmODI
here is a good vid of that days ensuing fun
http://www.youtube.com/watch?v=zzg5siwmODI
yea, i went to trt the day after we talked and had the boost turned down and exhaust wrapped...and the car tuned.
its getting a forged 370 now so it will be getting more boost soon
its getting a forged 370 now so it will be getting more boost soon
ended up getting a killer deal on the new motor stuff from TSP
this is what is on its way
Diamond Custom Piston Set: 4.010" Bore, 3.622" Stroke, 6.100"Rod Length, .945" Wrist Pin
Manley Forged 6.100" H-Beam Rods
Mahle Motorsports 4.015" LS1 Ring Set, 1.5mm, 1.5mm, 3.0mm,File Fit, For 4.010" Finished Bore
Clevite Connecting Rod Bearings, LS1, Per Bearing, FOR STOCKCRANK APPLICATIONS
Clevite Main Bearing Set for LS1 Application, STOCK CRANKAPPLICATIONS
GM 6.0L Cast-Iron Engine Block
GM 6.0L MLS Gasket, Set
GM LS1 Exhaust Manifold Gasket
Energy Suspension Polyeurethane Motor Mounts
LS7 Lifter Kit
what do you think...in combo with my stock crank and everything else already in my oil motor should be kick ***!
this is what is on its way
Diamond Custom Piston Set: 4.010" Bore, 3.622" Stroke, 6.100"Rod Length, .945" Wrist Pin
Manley Forged 6.100" H-Beam Rods
Mahle Motorsports 4.015" LS1 Ring Set, 1.5mm, 1.5mm, 3.0mm,File Fit, For 4.010" Finished Bore
Clevite Connecting Rod Bearings, LS1, Per Bearing, FOR STOCKCRANK APPLICATIONS
Clevite Main Bearing Set for LS1 Application, STOCK CRANKAPPLICATIONS
GM 6.0L Cast-Iron Engine Block
GM 6.0L MLS Gasket, Set
GM LS1 Exhaust Manifold Gasket
Energy Suspension Polyeurethane Motor Mounts
LS7 Lifter Kit
what do you think...in combo with my stock crank and everything else already in my oil motor should be kick ***!
Originally Posted by navymitch12
ended up getting a killer deal on the new motor stuff from TSP
this is what is on its way
Diamond Custom Piston Set: 4.010" Bore, 3.622" Stroke, 6.100"Rod Length, .945" Wrist Pin
Manley Forged 6.100" H-Beam Rods
Mahle Motorsports 4.015" LS1 Ring Set, 1.5mm, 1.5mm, 3.0mm,File Fit, For 4.010" Finished Bore
Clevite Connecting Rod Bearings, LS1, Per Bearing, FOR STOCKCRANK APPLICATIONS
Clevite Main Bearing Set for LS1 Application, STOCK CRANKAPPLICATIONS
GM 6.0L Cast-Iron Engine Block
GM 6.0L MLS Gasket, Set
GM LS1 Exhaust Manifold Gasket
Energy Suspension Polyeurethane Motor Mounts
LS7 Lifter Kit
what do you think...in combo with my stock crank and everything else already in my oil motor should be kick ***!
this is what is on its way
Diamond Custom Piston Set: 4.010" Bore, 3.622" Stroke, 6.100"Rod Length, .945" Wrist Pin
Manley Forged 6.100" H-Beam Rods
Mahle Motorsports 4.015" LS1 Ring Set, 1.5mm, 1.5mm, 3.0mm,File Fit, For 4.010" Finished Bore
Clevite Connecting Rod Bearings, LS1, Per Bearing, FOR STOCKCRANK APPLICATIONS
Clevite Main Bearing Set for LS1 Application, STOCK CRANKAPPLICATIONS
GM 6.0L Cast-Iron Engine Block
GM 6.0L MLS Gasket, Set
GM LS1 Exhaust Manifold Gasket
Energy Suspension Polyeurethane Motor Mounts
LS7 Lifter Kit
what do you think...in combo with my stock crank and everything else already in my oil motor should be kick ***!
what'd you give for that if i may ask
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
12 Second Club
iTrader: (6)
Joined: Jul 2005
Posts: 626
Likes: 0
From: Chitown-Jax NC-Jax FL-Honolulu-OKC, OK-NOW New Orleans Area
I dont care u guys pay rent here at my house. I have more F- bodies here than I can shake a stick at. see an LT1, Supercharged Z28, KillerVert 35th SS LE, STS Camaro, Crazy 408 WS6, and a good part of the time Gryde-1 Z28... can we get a sponser!!!!!!!!!!!!! We have the model covered!!!!!!!!
12 Second Club
iTrader: (6)
Joined: Jul 2005
Posts: 626
Likes: 0
From: Chitown-Jax NC-Jax FL-Honolulu-OKC, OK-NOW New Orleans Area
oh wait here is the youtube footage of the cleaning going on after the motor pull
http://www.youtube.com/watch?v=zzg5siwmODI
http://www.youtube.com/watch?v=zzg5siwmODI
Originally Posted by 1fastTransAm
I dont care u guys pay rent here at my house. I have more F- bodies here than I can shake a stick at. see an LT1, Supercharged Z28, KillerVert 35th SS LE, STS Camaro, Crazy 408 WS6, and a good part of the time Gryde-1 Z28... can we get a sponser!!!!!!!!!!!!! We have the model covered!!!!!!!!
Originally Posted by 1fastTransAm
ur good. I am sure I can work out something with no problem.. Just I need a wideband or stand alone fuel cell, or Catch can.