where to tap into oil pan?

Reply Subscribe

Thread Tools

Search this Thread

Oct 20, 2007 | 01:11 PM

SSilverSSurfer

Thread Starter

TECH Fanatic

iTrader: (8)

Joined: Jul 2004

Posts: 8,182

Likes: 0

From: College Station/Pasadena

where to tap into oil pan?

is there a way to run the feed to the turbo without tapping the pan? and if not where exactly do i tap into it?

Oct 20, 2007 | 01:18 PM

striker754

On The Tree

iTrader: (53)

Joined: Jan 2003

Posts: 169

Likes: 0

From: ok

you arent running the feed from the oil pan....

the drain needs to drain above oil level

Oct 20, 2007 | 01:23 PM

SSilverSSurfer

Thread Starter

TECH Fanatic

iTrader: (8)

Joined: Jul 2004

Posts: 8,182

Likes: 0

From: College Station/Pasadena

i have to tap the spot right above the filter correct? and where would the return go? this is for a TTi street kit btw

Oct 20, 2007 | 01:31 PM

trever phillips

Staging Lane

Joined: Sep 2005

Posts: 66

Likes: 0

From: st paul mn

do found a sweet pic on here by using the search, to the tee, don't guess or you'll have a big mess there is baffles in stuff in there. Oh no, the pic is gone my buddys is apart so if yea want i can get you a pic, Its tough doing it in the car but possable i did mine that way

Last edited by trever phillips; Oct 20, 2007 at 01:41 PM.

Oct 21, 2007 | 07:52 PM

deadmanTA

TECH Resident

iTrader: (7)

Joined: Jan 2006

Posts: 868

Likes: 0

From: Midland, NC

Lingenfelter makes a piece that just bolts on. has an 1/8 NTP and a -4AN already tapped in for the feedline. $69. It's on the site w/ the oilpans and oil coolers.

Reply Subscribe