KY Turbo & Performance Twin Build Up
KY Turbo & Performance Twin Build Up I keep reading about all these insane Turbo builds going on and I had to come out with some of the work I have been doing at the shop.
Here are a few pics of a build that been going on at the shop for a customer. Just a simple yet effective twin setup. I wont give exact specs or the board memebrs name out. We are all racers. If he wants to chime in he can.
Everything stays above the K-Member. The lowsest part of the setup is no lower than the K-Member its self.
Anyhow, here are some pics:
All in all it turned out extremely nice. The customer will be finishing the cold side in house at his shop. We are expecting BIG numbers to come from the setup when the boost is turned up.
Very soon I will be releasing a hot parts package for the guys wishing to buy a Charge Pipe and Down Pipe package for a 6.0L manifold build. I hope to have everything ready by the end of the year (next month or so). I will keep everyone informed on that progress.
Here are a few pics of a build that been going on at the shop for a customer. Just a simple yet effective twin setup. I wont give exact specs or the board memebrs name out. We are all racers. If he wants to chime in he can.
Everything stays above the K-Member. The lowsest part of the setup is no lower than the K-Member its self.
Anyhow, here are some pics:
All in all it turned out extremely nice. The customer will be finishing the cold side in house at his shop. We are expecting BIG numbers to come from the setup when the boost is turned up.
Very soon I will be releasing a hot parts package for the guys wishing to buy a Charge Pipe and Down Pipe package for a 6.0L manifold build. I hope to have everything ready by the end of the year (next month or so). I will keep everyone informed on that progress.
Definetly looks pretty cool. How large is the downpipe? I like the way you combined them. I'm going to have to borrow that idea when the diesel twins go on the camaro.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Very soon I will be releasing a hot parts package for the guys wishing to buy a Charge Pipe and Down Pipe package for a 6.0L manifold build. I hope to have everything ready by the end of the year (next month or so). I will keep everyone informed on that progress.
solid motor mounts or stock style? looks good. and what k member?
Cool setup, TC units and JGS 40mm Gates?
how about a GTO hot parts setup?
Nice build! Not a big fan of the merge where the DP's come together, but I am sure there was a reason for it (like spce constraints).
It should be a sucess. I am planning a entry level type setup. T4 flange, 38mm WG flange, O2 bungs for WB & NB. I am working out a way to keep the cost low yet maintain a level of profitability to keep it viabale for the shop. Being a one man operation slows things down a bit.
