Paging EPP f1a install help
Thread Starter
Joined: Dec 2004
Posts: 699
Likes: 1
From: Redondo Beach, California
Paging EPP f1a install help I am trying to install the j bracket on but I'm seeing that the hex spacers aren't long enough to clear the eight rib pulley. Also the five in blower belt is touching alternator pulley and the top of the swaybar. What am I doing wrong ? Or was I sent the six rib kits hex spacer wich would be shorter right? Help me out thanks
Last edited by SELLSZ06; Nov 17, 2007 at 07:11 PM.
8 sec potential, 12 sec slip
iTrader: (50)
Joined: Apr 2002
Posts: 4,092
Likes: 2
From: Savannah, GA
I had to put a couple washers on mine to space them out some, but mine was originally a 6 rib kit and I had to do that when I converted to my 8 rib, so I didn't buy the whole kit as an 8 rib. I don't even know if there are longer hex spacers for the 8 rib kit... If not, I'd have thought some shorter spacers would have been included in the kit.
