My TT project
Thread Starter
On The Tree
Joined: Mar 2004
Posts: 131
Likes: 0
From: Boise, ID or Santa Cruz,CA
My TT project Well a little update on my twin turbo 01 ZO6. After 4
months in the machine shop and 11K in cost it is back
to Rich's shop for reinstall. God this thing had
better run great. We still need to get the tranny back
from Cave Junction, AZ where it was being updated. I
just ordered tranny and diff coolers. We are putting
vents in the hood and then some stripes.Rich is making
a removable spoiler and air dam for it. The turbos
were rebuilt and inter-coolers cleaned. The meth
injection system needs to go in. Then JR can finish
his tune. After that it goes to Seattle for roll cage
and fire suppression system. Then some new tires and
hopefully I will be ready to go racing. The first race
will probably be the Big Bend Texas in April.
Jeffy'
2001 ZO6 with 6.3L LPE Stage 4 Twin Turbo kit, 659 rwhp and 716 ft/lbs torque at full boost
months in the machine shop and 11K in cost it is back
to Rich's shop for reinstall. God this thing had
better run great. We still need to get the tranny back
from Cave Junction, AZ where it was being updated. I
just ordered tranny and diff coolers. We are putting
vents in the hood and then some stripes.Rich is making
a removable spoiler and air dam for it. The turbos
were rebuilt and inter-coolers cleaned. The meth
injection system needs to go in. Then JR can finish
his tune. After that it goes to Seattle for roll cage
and fire suppression system. Then some new tires and
hopefully I will be ready to go racing. The first race
will probably be the Big Bend Texas in April.
Jeffy'
2001 ZO6 with 6.3L LPE Stage 4 Twin Turbo kit, 659 rwhp and 716 ft/lbs torque at full boost
