Converting Internal to External WG
12-08-2007, 08:07 AM
#1
8 Second Club
Thread Starter
iTrader: (7)
Join Date: Dec 2002
Location: Maryland
Posts: 1,086
Likes: 0
Received 0 Likes
on
0 Posts
Converting Internal to External WG I'm assuing that this can be done, but wanted to see if this idea is feasible:
1) Weld up Internal WG flap in turbo.
2)I have cast manifolds, but have an old contact from an engineering company I used to work for that can weld a WG flange to my manifold.
3) Modify downpipes to accept WG dump.
What do you guys think? Am I completely nuts?
1) Weld up Internal WG flap in turbo.
2)I have cast manifolds, but have an old contact from an engineering company I used to work for that can weld a WG flange to my manifold.
3) Modify downpipes to accept WG dump.
What do you guys think? Am I completely nuts?
12-12-2007, 12:04 AM
#7
Banned
iTrader: (2)
Join Date: Jul 2005
Location: Schaumburg, IL
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
then find a place to drill and attach wg's to the log manifolds. since your turbo outlet is sunken in, you'd have to weld a divider in to seperate the WG gas outlet from the turbine outlet.. not worth it. end of story.
Why do you want external wg's btw?
Why do you want external wg's btw?
