BFEGTO

can you use the sts buzzer warning with a non sts oil pump? if so how do you wire it?

smoke20

iTrader: (2)

im sure you could. you would need a pressure sensor like he one on top of the STS pump installad and wired to the buzzer. the STS sensor is adjustable to i would look at something like that.

ls1leadfoot

iTrader: (1)

i would like to also see a diagram on that as well


if possible.......


i know i know do a search

koolaid_kid

iTrader: (21)

I take it that you are requesting a wiring diagram from the sensor to the buzzer?
If so, that is an interesting question, since that is built into the wiring harness itself. Are you not using the standard wiring harness?

barnat

iTrader: (59)

Were gonna be using the same idea as STS for our belt driven scavanging pump system ,but instead of useing a pressure switch type contact .Were gonna use a oil level sensor in our can to determine the pumps integrety. Because if and when our pump ever **** ,from debrie or metal ,the oil level would rise in our can, closeing the oil level contact switch ,either lighting a light or buzzer or even both thanks BARNAT

RAGENZ28

iTrader: (5)

So you're using a belt driven system and separate tank just for the turbo or belt driven system to feed the motor and turbo?