Smokinhawk Bracket,i Cant Find A Belt!!!
#1
10 Second Club
Thread Starter
iTrader: (22)
Join Date: Mar 2006
Location: Northwest side of Chicago
Posts: 3,677
Likes: 0
Received 2 Likes
on
2 Posts
Smokinhawk Bracket,i Cant Find A Belt!!!
Okay im loosing my mind here. A 715k6 is to short and wont fit on,a 720k6 fits but is to loose and makes noise. Im running a 25%underdrive slp pulley and the speed inc manual tensioner.
What do i do?
Alex
What do i do?
Alex
#2
9 Second Club
iTrader: (22)
I have the march underdrive pulley. And a Thunder Racing tensioner. I run a 710k6 and its perfect. Its tight slipping on, i slip it over water pump last, then i put tension on and its good to go. Do you have the little bar installed right? Look at the pic below. Not mine but what smokin hawk sent me. Id imagine we would run the same belt as im all stock pulley's except the march underdrive pulley.
Chris
Chris
#6
10 Second Club
Thread Starter
iTrader: (22)
Join Date: Mar 2006
Location: Northwest side of Chicago
Posts: 3,677
Likes: 0
Received 2 Likes
on
2 Posts
Okay i worked at it for a while with the 715. I use alittle silicon spray on the water pump and was able to get it on. The tensioner is pretty much not doing anything any more but it seems to be at the perfect tension. It goes on the dyno tomorrow so we will see.
Thanks guys.
Thanks guys.