6.2l boosted motor help
6.2l boosted motor help ok was thinkg about this stuff. please let me know.
ls3 block
callies crank
ls7/ls9 titanium rods
diamond pistons.
arp every thing
now first what do you guys think
second how strong ar the factory ls7 rods
third will my f-body oil pump work on the ls3 block
and please help me with any thing i am missing.
thanks
Big Bird
ls3 block
callies crank
ls7/ls9 titanium rods
diamond pistons.
arp every thing
now first what do you guys think
second how strong ar the factory ls7 rods
third will my f-body oil pump work on the ls3 block
and please help me with any thing i am missing.
thanks
Big Bird
TECH Enthusiast
Joined: Dec 2001
Posts: 548
Likes: 0
From: Dublin, CA
I'm working on a similar build. LS3 block, Diamond L92 pistons -12cc, Callies crank and 2" journal rods, ported L92 heads, LS7 lifters, Comp 921 dual springs, D1SC.
I was going to reuse my eagle rods with a stock size 2.1" big end, but they 2.1" cranks were out of stock.
I was going to reuse my eagle rods with a stock size 2.1" big end, but they 2.1" cranks were out of stock.
Last edited by blu00rdstr; Feb 14, 2008 at 10:28 PM.
The only thing I would change is the LS7 titanium rods.
They are great for a N/A build, but they are not strong enough for a boosted motor.
A high quality H-beam would be a good upgrade in strength.
Your existing oil pump will work fine.
They are great for a N/A build, but they are not strong enough for a boosted motor.
A high quality H-beam would be a good upgrade in strength.
Your existing oil pump will work fine.
TECH Enthusiast
Joined: Dec 2001
Posts: 548
Likes: 0
From: Dublin, CA
