STS Build Done!!
STS kit, FMIC from TRTturbo, 42# Injectors, Wlabro Pump, Pacsetter LT's, ORY, Wrap frop Y-pipe back, Air Ride Tech Suspension, Wilwood 6-Piston Brakes. and a few other things
Im goning to run 8psi or so. I did a custom tune at the track with a handheld and a wideband..and in a few weeks ill get a dyno tune to see how I did.
Numbers from the track a best of 12.7 @ 117. and the next run I blew the gaskets out of the headers on 1,7, and 8 but still ran a 13. So just by going off the trap speed im thinking it should run a high 11 once I launch the car. I didnt take off too hard for fear of leaving the 10 bolt at the line.
Im goning to run 8psi or so. I did a custom tune at the track with a handheld and a wideband..and in a few weeks ill get a dyno tune to see how I did.
Numbers from the track a best of 12.7 @ 117. and the next run I blew the gaskets out of the headers on 1,7, and 8 but still ran a 13. So just by going off the trap speed im thinking it should run a high 11 once I launch the car. I didnt take off too hard for fear of leaving the 10 bolt at the line.
I noticed a giant difference between LT's with ORY vs manifolds + cats. I hear wrapping the exhaust works like a champ, planned to do that also, but too busy working on other "issues".
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
ORY = off road y-pipe so there are no cats on the car. As for spool time I blew out the header gaskets on pistons 1, 7, and 8. So I didn’t have the full back pressure to see how it was. But on the first run I did, once I got on it in 2nd gear I had 8psi by 4200rpm. And I am an automatic, so if there is a little lag…the rear might just last a week longer. 
I now have the “dead soft” gaskets from Percy’s and will be taking it back in maybe next week and will launch he car hard to see what she will do. Will most likely get the Moser 9” 31 spine.
I now have the “dead soft” gaskets from Percy’s and will be taking it back in maybe next week and will launch he car hard to see what she will do. Will most likely get the Moser 9” 31 spine.