the ladies like em thick
Thread Starter
Joined: Nov 2001
Posts: 10,018
Likes: 51
From: Virginia
have to talk to w2w to find out how much. I agree it is a pretty penny but weight wise i could not 'afford' an iron block. i was nearly 3900 race weight last year with my ls2
i agree my block got a bit heavier but well worth the weight. this is my old block
the heads are all pro 6 bolt cathedral
still going to run a stock tb and ls6 intake at least until i can get ahold of one of those street warrior units. also stock rockers, stock style oiling system (bigger pan)
i agree my block got a bit heavier but well worth the weight. this is my old block
the heads are all pro 6 bolt cathedral
still going to run a stock tb and ls6 intake at least until i can get ahold of one of those street warrior units. also stock rockers, stock style oiling system (bigger pan)
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I guess now you get to meet the LSX block. If you noticed the 2 bolt holes in addition to the standard 4 then it would be an easy sign. Nice block man and by the looks of the cylinder wall you are going what 370ish/ 383? Lots of material and with the extra 2 bolts holding you money down on the block, I cant wait to see a 30 psi LSX motor.
I guess now you get to meet the LSX block. If you noticed the 2 bolt holes in addition to the standard 4 then it would be an easy sign. Nice block man and by the looks of the cylinder wall you are going what 370ish/ 383? Lots of material and with the extra 2 bolts holding you money down on the block, I cant wait to see a 30 psi LSX motor.
I also thought I remembered him posting about having this done to his LS2 block. I won't hold it against you.Larry
I guess now you get to meet the LSX block. If you noticed the 2 bolt holes in addition to the standard 4 then it would be an easy sign. Nice block man and by the looks of the cylinder wall you are going what 370ish/ 383? Lots of material and with the extra 2 bolts holding you money down on the block, I cant wait to see a 30 psi LSX motor.
Please, no.
Well, I appreciate your attempt at being Captain Obvious. If YOU notice the block is aluminum, LSX=iron. In addition to the post just previous to yours where MIGHTYMOUSE states "i agree my block got a bit heavier but well worth the weight. this is my old block". I also thought I remembered him posting about having this done to his LS2 block. I won't hold it against you.
Larry
I also thought I remembered him posting about having this done to his LS2 block. I won't hold it against you.Larry
Well i would think the warhawk and erl will be pretty close in weight.I believe the warhawk weights 133 lbs and the lsx lron weights 225 lbs.I still like the warhawk and think people are going the the erl so they can run at memphis.
Did W2W weigh it MM?
