Boost controller for ATI kit
#1
Boost controller for ATI kit
I'm sure if i do a search i'll see a lot of options, but i still rather ask
and hope the ATI guys respond. My plan is to run 10#'s on my stock
short block and lower my compression with my GTP 6.0 heads.
I want to spin my D1SC faster so i build boost sooner and i want to install
some kind of boost controller that will bleed off boost after i hit 10#'s.
And it will be an insurance policy just incase the tranny doesn't shift and
the motor gets overboosted. I'm gonna try the search button but i want
guys like Kp and PSJ to give me their idea.
and hope the ATI guys respond. My plan is to run 10#'s on my stock
short block and lower my compression with my GTP 6.0 heads.
I want to spin my D1SC faster so i build boost sooner and i want to install
some kind of boost controller that will bleed off boost after i hit 10#'s.
And it will be an insurance policy just incase the tranny doesn't shift and
the motor gets overboosted. I'm gonna try the search button but i want
guys like Kp and PSJ to give me their idea.
#2
8 Second Club
iTrader: (34)
Just swap pulleys, pulley costs 90.00 and isnt very complicated, plus no chance of overboosting ever.
I have tried restricting the inlet and PWM controlled BOV and nothing every really helped much. But the simplest thing to do is just restrict the inlet, but I found by doing that the boost is changed across the whole RPM range.
I have tried restricting the inlet and PWM controlled BOV and nothing every really helped much. But the simplest thing to do is just restrict the inlet, but I found by doing that the boost is changed across the whole RPM range.