comp 918's gonna be enough?
 

Ok so I have the comp cams part #54-444-11 specs are 224/230 duration at .050 with the lift at .581/.588 all on a 114lsa. I plan on running about 7lbs of boost with this cam do guys think the 918's are gonna be enough spring with this cam and 7lbs of boost on top of it?:confused: all input appreciated.:chug:

I would do a stouter spring. But I have seen people get by with 918's with low boost & low rpm's.

ya Im not spinning the motor that high just to 6k max.

I run 918's, I have 8 or 9 PSI and about the same cam specs, so far so good. better than a year and a half on em... kinda makes me feel bad :emb:, but hey it works

Why does it make you feel bad if it works use it right?:D

I had 918's...tr224.....spun it to 6300 w/ 10psi

Hows the TR224 go with boost ? 112 or 114 lsa ?

I have a 112lsa tr224 from when i was NA, and was thinking of giveing it ago.

I think its a 112 lsa....it worked great

i have 918s runnin 5-6lbs, it runs great.