critique my setup...
critique my setup... My camaro z-28 plans are...
6.0L block stroked to 408 using callies crank and rods, L92 heads and intake with forged dished pistons to get me down to around 8.5:1 CR. I am going to use the C6 manifolds and build my own tt setup using 2 mpt70 turbos with .68A/R (Should I go .96 A/R? its going to be about 99% street driven) Dual 38mm or 44mm Tial wastegates and a teal 50mm BOV. For fuel im going to use a twin walbro 255 setup. I am also going to put in a meth setup and am going to run whatever boost I can and still run pump gas.
I am shooting for 750rwhp or so. From everything I have read I think that this setup will do it but please correct me if im wrong.
Havent figured out what to do for an oiling system and what i need to upgrade, any help there is appreciated also.
6.0L block stroked to 408 using callies crank and rods, L92 heads and intake with forged dished pistons to get me down to around 8.5:1 CR. I am going to use the C6 manifolds and build my own tt setup using 2 mpt70 turbos with .68A/R (Should I go .96 A/R? its going to be about 99% street driven) Dual 38mm or 44mm Tial wastegates and a teal 50mm BOV. For fuel im going to use a twin walbro 255 setup. I am also going to put in a meth setup and am going to run whatever boost I can and still run pump gas.
I am shooting for 750rwhp or so. From everything I have read I think that this setup will do it but please correct me if im wrong.
Havent figured out what to do for an oiling system and what i need to upgrade, any help there is appreciated also.
