Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

help with new fuel setup

Thread Tools
 
Search this Thread
 
Old Oct 31, 2008 | 10:51 PM
  #1  
one fast zo6's Avatar
Thread Starter
TECH Resident
15 Year Member
iTrader: (490)
 
Joined: Jan 2008
Posts: 791
Likes: 0
From: Austin, Texas
Default help with new fuel setup

i just moved from a stage3 nasty street kit to a sumped race tank and dual bosch 420 external pumps what is the best way to set this up? i would like to run boost referenced. what size lines do i need? what about Ys for the dual pumps. thanx for all your help thomas.
Reply
Old Nov 1, 2008 | 07:08 PM
  #2  
one fast zo6's Avatar
Thread Starter
TECH Resident
15 Year Member
iTrader: (490)
 
Joined: Jan 2008
Posts: 791
Likes: 0
From: Austin, Texas
Default fuel

no help yet! come on guys i need a little help..car made 853rwhp with the stage 3 nasty setup.
Reply
Old Nov 1, 2008 | 07:28 PM
  #3  
cbr600rx7's Avatar
TECH Enthusiast
iTrader: (12)
 
Joined: Oct 2008
Posts: 701
Likes: 0
Default

Sorry man wish i could help but my fuel needs are no where near that high. For the line size i would say 6an or 8an but i am sure some one with more experience will chime in here in a second.
Reply
Old Nov 2, 2008 | 02:34 PM
  #4  
405HP_Z06's Avatar
TECH Addict
iTrader: (11)
 
Joined: Jun 2003
Posts: 2,215
Likes: 19
From: Arlington, Tx
Default

There is a hundred different ways you could run the fuel system. I recommend you give Lonnie a call at Lonnie's Performance. He is very knowledgeable concerning fuel systems and will get you going in the correct direction.

http://www.lonniesperformance.com/
Reply




All times are GMT -5. The time now is 11:33 PM.