Schrader valve install
Thread Starter
12 Second Club
iTrader: (1)
Joined: Jul 2005
Posts: 497
Likes: 0
From: Grand Rapids, MI
Schrader valve install I removed my schrader valve a couple of years ago to install a wet nitrous kit. I have a 98 Z28. I removed it from the Driver's side fuel rail.
I recently sold the nitrous kit and bought a Schrader valve core from GM. What tool do I use to install this? Thanks.
I recently sold the nitrous kit and bought a Schrader valve core from GM. What tool do I use to install this? Thanks.
There are valve install tools at any local auto parts store. Then again, i had to stick one in this weekend for a buddy of mine, and didn't have my tool. I just used a really skinny pair of needle nose pliers and threaded it in that way.
I've seen some with different rubber/plastic sealing materials also. Not sure if this would have an effect on exposure to fuel. But it shouldn't matter as long as you always keep a cap on it.
The cap is there to keep debris out of it and to protect it from leaking.
az, bicycle, cam, cap, extensions, install, installation, installing, located, schrader, tire, toyota, truck, valve, valvephoenix
