Fuel system questions
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Jun 2008
Posts: 662
Likes: 2
From: Aransas Pass, TX
Fuel system questions I'm putting a 98 ls1 into a fox body.
would it be possible to run a setup like what i have in the drawn up?
Using the stock 98 fuel rails with the regulator built in.
I think that way would be cheaper then the using a vette filter.
If I were to go the corvette fuel filter/reg. route i would have to buy the fittings for the filter($50) the filter ($50) and the returnless style rails($40).
would it be possible to run a setup like what i have in the drawn up?
Using the stock 98 fuel rails with the regulator built in.
I think that way would be cheaper then the using a vette filter.
If I were to go the corvette fuel filter/reg. route i would have to buy the fittings for the filter($50) the filter ($50) and the returnless style rails($40).
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Jun 2008
Posts: 662
Likes: 2
From: Aransas Pass, TX
Negative. 98 had a regulator built into the fuel rail. If the regulator was in the tank why would my fuel rails have a return on them?
Where do you run it to?
This is my first time planing/plumbing a fuel system.
This is my first time planing/plumbing a fuel system.
