Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

stand alone fuel system???????

Thread Tools
 
Search this Thread
 
Old 09-12-2009 | 12:20 AM
  #1  
402GOAT's Avatar
Thread Starter
10 Second Club
iTrader: (2)
 
Joined: Sep 2009
Posts: 426
Likes: 0
From: Cape Gir., MO
Default stand alone fuel system???????

i have recently installed a zex nitrous system on my 2005 ls2 gto and i am planning on using astand alone fuel system for the fuel supply to the nitrous. im mounting a 1 gal fuel cell in trunk and need an inline fuel pump to feed a constant 55 psi. i probly wont exceed 175 hp shot of nitrous.

my question is what type of fuel pump to use? does anyone else run a astand alone system and if so what do you suggest?
Old 09-12-2009 | 09:21 AM
  #2  
Lonnies Performance's Avatar
LS1TECH Sponsor
iTrader: (16)
 
Joined: Feb 2007
Posts: 2,662
Likes: 2
From: Pittsburgh, PA
Default

You can run an inline Walbro pump. I have these pumps along with the correct AN line adapters (to connect to braided line) & full wiring harness if you are looking for a kit.

Please be advised that you will also need a fuel pressure regulator & return line to properly control the pressure.

If I can be of help with any parts or a complete fuel system, feel free to give me a call.
Old 09-12-2009 | 04:51 PM
  #3  
402GOAT's Avatar
Thread Starter
10 Second Club
iTrader: (2)
 
Joined: Sep 2009
Posts: 426
Likes: 0
From: Cape Gir., MO
Default

thanks a bunch. i just happened to stumble upon your website lastnight and i think i seen the setup your talking about. i will proably go your route. it looks like the superior setup.
Old 09-12-2009 | 07:15 PM
  #4  
Lonnies Performance's Avatar
LS1TECH Sponsor
iTrader: (16)
 
Joined: Feb 2007
Posts: 2,662
Likes: 2
From: Pittsburgh, PA
Default

I use only top quality components in my kits.

Let me know if I can help.
Old 09-12-2009 | 08:18 PM
  #5  
402GOAT's Avatar
Thread Starter
10 Second Club
iTrader: (2)
 
Joined: Sep 2009
Posts: 426
Likes: 0
From: Cape Gir., MO
Default

hey lonnie, when it says on your site "Requires your sending unit for modifacation" does that mean i need to send it to you? or you mean i just need to plan on wiring it in to the setup during installation? just wondering

its written under the description for the pontiac fuel kit
Old 09-13-2009 | 08:11 AM
  #6  
Lonnies Performance's Avatar
LS1TECH Sponsor
iTrader: (16)
 
Joined: Feb 2007
Posts: 2,662
Likes: 2
From: Pittsburgh, PA
Default

For the GTO, I need your entire fuel bucket to modify.

It will be returned, fully assembled, tested & ready to install.




All times are GMT -5. The time now is 07:21 AM.