Help me with my inline filter setup!

Reply Subscribe

Thread Tools

Search this Thread

Mar 29, 2010 | 02:46 PM

2XR95Z28

Thread Starter

TECH Fanatic

iTrader: (4)

Joined: Jul 2007

Posts: 1,351

Likes: 0

From: Davenport, IA

Help me with my inline filter setup!

So the last thing i need to finish up my fuel system in my 5.3 swap s10 is my fuel filters. Im running a sumped fuel cell with foam inside, -8 feed line and a Bosch 044 pump and wondering what i should do for placement of my filters...

Should I do just one between the cell and pump?
Just one after the pump?
or one before and after the pump?

Also does anyone have experience with the Summit Filters?

And what micron filter would you go with?
Summit has 10 micron and 100 micron in a -8 inlet and outlet i would need?

Just looking for suggestions here and not trying to completely break the bank on these...

Any help is appreciated!
Thanks!

Mar 30, 2010 | 12:13 PM

Nasty N8

FormerVendor

iTrader: (33)

Joined: Feb 2002

Posts: 5,052

Likes: 0

From: Lake in the Hills, IL

You need a pre and a post be careful of the Summit cheap filters make sure they are for injected flow pressure most are for carb.

Apr 3, 2010 | 02:48 PM

2XR95Z28

Thread Starter

TECH Fanatic

iTrader: (4)

Joined: Jul 2007

Posts: 1,351

Likes: 0

From: Davenport, IA

Can anyone recommend me some filters here, this is the last thing i have to buy and i'm lost on it. I need -8 inline hoses. Can anyone please help me out here??

Reply Subscribe