walbro 255 inline
dont think you need a harness for it.
on my old one i just hooked up a relay to the power terminals to turn on when the other fuel pump turns on.
it will help you boost your fuel pressure some.
although its better to have a good intake this will help out some.
on my old one i just hooked up a relay to the power terminals to turn on when the other fuel pump turns on.
it will help you boost your fuel pressure some.
although its better to have a good intake this will help out some.
Thread Starter
11 Second Club
Joined: Aug 2003
Posts: 220
Likes: 0
From: Brew City
ok --what power teminals are ya talking about thow --Where am i tapping my postive off of ? and i have a ported lengenfelter intake--I,ve never messed with my fuel system till now,any guidence would be great
Thanx Tim
Thanx Tim
what i did for my inline was run a desent sized gauge wire to a relay, then to the pump. I used the power wire from the stock pump to turn on the relay (sorry cant remember the color, you can acess this without droping the tank)
then ofcoasre grounded the ground wire.
then ofcoasre grounded the ground wire.
