forged 383 truck intake injector question
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Location: Desoto
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
forged 383 truck intake injector question
well a buddy of mine has a forged 383 ls1, he is running a truck intake on it because it is the intake he used on his original swap into his s10, I have done tons of searching and would like some straight forward guidance. i know the injectors he has in there now are going to be way too small. is there an injecotr that will fit in the truck intake with the truck fuel rails? we dont really mind having to change the harness connector, so can anyone help me out?
thanks in advance
Josh
thanks in advance
Josh
#2
FormerVendor
iTrader: (30)
Join Date: Sep 2008
Location: Cumming, Ga
Posts: 1,274
Likes: 0
Received 0 Likes
on
0 Posts
well a buddy of mine has a forged 383 ls1, he is running a truck intake on it because it is the intake he used on his original swap into his s10, I have done tons of searching and would like some straight forward guidance. i know the injectors he has in there now are going to be way too small. is there an injecotr that will fit in the truck intake with the truck fuel rails? we dont really mind having to change the harness connector, so can anyone help me out?
thanks in advance
Josh
thanks in advance
Josh
http://fuelinjectorconnection.com/sh...&productId=205
#3
TECH Resident
iTrader: (36)
Join Date: Dec 2006
Location: Lafayette, CA
Posts: 985
Likes: 0
Received 0 Likes
on
0 Posts
If your looking for a used set, do a search in the GM classifeds on ptnet. They pop up on there all the time.
http://www.performancetrucks.net/for...splay.php?f=23
By the way. FIC quoted you a really good price for shorty truck injectors.
Rick
http://www.performancetrucks.net/for...splay.php?f=23
By the way. FIC quoted you a really good price for shorty truck injectors.
Rick
#4
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2007
Location: Desoto
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
thanks for your help guys, i should have mentioned that they are the mini delphi plugs. are these injectors that you recommended to me the same height as the mini delphi's?
again guys
thank you
again guys
thank you