Need plug for stock LS1 return hard line.

Reply Subscribe

Thread Tools

Search this Thread

May 2, 2012 | 07:59 PM

bayer-z28

Thread Starter

TECH Veteran

iTrader: (14)

Joined: Apr 2005

Posts: 4,085

Likes: 1

From: N. Falmouth MA

Need plug for stock LS1 return hard line.

Need a plug for this. It's the stock LS1 return line at the T after the filter. Need a plug to go in the old line.

Anyone know what size it is?

-=EDIT=-
Looks like an M14 1.5 metric adapter fitting. Gonna have to take a gamble and just pick one. Gotta get this car done asap.

Last edited by bayer-z28; May 2, 2012 at 08:32 PM.

May 2, 2012 | 08:42 PM

bayer-z28

Thread Starter

TECH Veteran

iTrader: (14)

Joined: Apr 2005

Posts: 4,085

Likes: 1

From: N. Falmouth MA

This looks like it'll work
http://www.jegs.com/i/Russell/799/64...ductId=1271024

May 4, 2012 | 08:47 PM

bayer-z28

Thread Starter

TECH Veteran

iTrader: (14)

Joined: Apr 2005

Posts: 4,085

Likes: 1

From: N. Falmouth MA

^ That one didn't fit..

Any ideas?

May 5, 2012 | 06:42 AM

Brad Campbell

Launching!

iTrader: (19)

Joined: Jul 2010

Posts: 250

Likes: 0

From: Groton, CT.

Bring me the fitting and the hose and I'll weld it into a plug for you. Other wise start by checking the thread on the fitting. Was the m14 too big/small was it the right size but just didn't thread all the way?

May 5, 2012 | 07:50 AM

bayer-z28

Thread Starter

TECH Veteran

iTrader: (14)

Joined: Apr 2005

Posts: 4,085

Likes: 1

From: N. Falmouth MA

Groton, eh? My buddy has a shop in middletown. Was thinking about bringing it to him to have him weld it up. Wouldn't mind a road trip though.

The M14 size was fine, but the o-ring seat was too big, and the threads were off. Prolly a 1.25 thread. Didn't try to thread it.