Help Problem with racetronix kit
#1
Help Problem with racetronix kit
Hi All,
I just installed a FPA-001 fuel pump with the FPWH-001 wire kit. Install went nicely, everthing went smoothly (I dropped the tank). I filled the fuel bucket and added ten gallons of fuel let stand for 10 min, tryed priming the system...but there is zero fuel pressure???
I can hear the pump run and shut off after a few seconds but again no pressure at all-zero.
any thoughts?
thanks
I just installed a FPA-001 fuel pump with the FPWH-001 wire kit. Install went nicely, everthing went smoothly (I dropped the tank). I filled the fuel bucket and added ten gallons of fuel let stand for 10 min, tryed priming the system...but there is zero fuel pressure???
I can hear the pump run and shut off after a few seconds but again no pressure at all-zero.
any thoughts?
thanks
#2
LS1TECH Sponsor
iTrader: (2)
Hi All,
I just installed a FPA-001 fuel pump with the FPWH-001 wire kit. Install went nicely, everthing went smoothly (I dropped the tank). I filled the fuel bucket and added ten gallons of fuel let stand for 10 min, tryed priming the system...but there is zero fuel pressure???
I can hear the pump run and shut off after a few seconds but again no pressure at all-zero.
any thoughts?
thanks
I just installed a FPA-001 fuel pump with the FPWH-001 wire kit. Install went nicely, everthing went smoothly (I dropped the tank). I filled the fuel bucket and added ten gallons of fuel let stand for 10 min, tryed priming the system...but there is zero fuel pressure???
I can hear the pump run and shut off after a few seconds but again no pressure at all-zero.
any thoughts?
thanks
__________________
Manufacturer / Distributor of Automotive Fuel Systems, Components & Electronics
Please support a Racetronix dealer near you for personalized service.
>WEB SITE<
Manufacturer / Distributor of Automotive Fuel Systems, Components & Electronics
Please support a Racetronix dealer near you for personalized service.
>WEB SITE<
#3
#4
I dropped a line to the web master...hopefully that gets me on the site.
really would love some ideas on what to check next??
Things I'v looked at/ checked out. Fuel filter is new and can blow though it easy, lines are in good shape and clear.
Pump lines are not kinked...
#5
LS1TECH Sponsor
iTrader: (2)
Just as with this forum you have to confirm your e-mail address.
Check your SPAM folders for the activation code e-mail from our forum server.
Once this is done a moderator will review your personal info and authorize access. This is all covered in our forum faq.
__________________
Manufacturer / Distributor of Automotive Fuel Systems, Components & Electronics
Please support a Racetronix dealer near you for personalized service.
>WEB SITE<
Manufacturer / Distributor of Automotive Fuel Systems, Components & Electronics
Please support a Racetronix dealer near you for personalized service.
>WEB SITE<
#6
It has nothing to do with your country.
Just as with this forum you have to confirm your e-mail address.
Check your SPAM folders for the activation code e-mail from our forum server.
Once this is done a moderator will review your personal info and authorize access. This is all covered in our forum faq.
Just as with this forum you have to confirm your e-mail address.
Check your SPAM folders for the activation code e-mail from our forum server.
Once this is done a moderator will review your personal info and authorize access. This is all covered in our forum faq.
I placed my info in the system. The system says my e-mail is already in use (how that is when I never signed up before weird??)
web master is not getting back to me so far...
you guys ever hear of a phone?
maybe you could help me out instead of acting like I have no idea how to sign up on a forum?