Fuel line and regulator question
Thread Starter
8 Second Club
iTrader: (12)
Joined: Feb 2011
Posts: 2,025
Likes: 4
From: Granby, Mass
Fuel line and regulator question So i had a question on the routing of the feed return and regulator. I have it now going to one rail then across to the other then out to the regulator and to the return. Feed is 8an and return is 6an. So just wondering which is the best way to go and if i had this right or wrong. I took some pictures and made a diagram let me know which is right. Any help is appreciated. Thanks
This is the way i have it now
Or should i do it this way?
This is the way i have it now
Or should i do it this way?
Really just an aesthetic preference.. You could just swap sides if you're feed isn't long enough.. Feed driverside frt, move crossover to the back & mount your reg to the pass side rail. That's assuming your existing return line is long enough.
