Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

Code P0200 injectors circuit *Please Help*

Thread Tools
 
Search this Thread
 
Old Jun 9, 2015 | 04:24 PM
  #1  
corvet786c's Avatar
Thread Starter
TECH Fanatic
15 Year Member
iTrader: (6)
 
Joined: May 2005
Posts: 1,410
Likes: 11
From: Port St. Lucie, Fl
Default Code P0200 injectors circuit *Please Help*

Ok got this code this morning, car runs horrible, u can hear how idle is unstable (Up and down). Acceleration is horrible fells like it just boggs and u can hear it bogging.

I pulled inject fuses and seem good. Bought new spark plug wires and plugs. Also searched on here and found some minor discussion on inj wire harness being ripped or cut. I searched driver and pass side and could not find any.

I can say that my inj wire harness looks dry from old electrical tape etc etc. Can't seem to find any exposed wires.

Could it be the O2 sensors?

Don't know what to do next. Anyone else fix this issue?
Reply
Old Jun 9, 2015 | 06:11 PM
  #2  
corvet786c's Avatar
Thread Starter
TECH Fanatic
15 Year Member
iTrader: (6)
 
Joined: May 2005
Posts: 1,410
Likes: 11
From: Port St. Lucie, Fl
Default

seriously anyone fix this yet ?
Reply
Old Jun 11, 2015 | 06:09 AM
  #3  
corvet786c's Avatar
Thread Starter
TECH Fanatic
15 Year Member
iTrader: (6)
 
Joined: May 2005
Posts: 1,410
Likes: 11
From: Port St. Lucie, Fl
Default

I checked the injectors and are they supposed to be loose? meaning turning free play while they are in there place. I dont see any cuts of any sort. Do I have to cut the entire injector harness. Fuses seem ok.

Any suggestions.
Reply




All times are GMT -5. The time now is 09:29 PM.