650whp fbody fuel pump
Thread Starter
Staging Lane
Joined: Aug 2015
Posts: 85
Likes: 0
650whp fbody fuel pump Hey guys, my car is getting finished up and will be hitting the dyno soon, and I've been stressing out over the fuel pump. It is a single walbro 255 right now. The car is a 2000 Camaro, stock bottom, 317s, tick stage 2 turbo cam, ls6 intake, and a tnetics T76. Before I go to a bigger forged motor, which is when I'll run -8 feed lines, -6 return and all that good stuff, would a Racetronix pump and Hotwire kit be a good idea? I saw a guy making 644whp with one on an lq4 with no signs of letting up. 550-600 wheel is my goal, so I figured i could get by with it. Also if I need a little more, I could hook a boost a pump to it. What do you guys think? I have no plans of going past 600-650 WHP with this setup, but I want to keep the pump in a safe zone, within its limits. Thanks, Logan
Haven't been on a dyno but I know I'm close to 600 rwhp and likely even more torque. With that said I run a Racetronix 255 pump and hotwire kit, and it works like a charm everytime
