Squash dual pump users, Help needed
Thread Starter
Teching In
Joined: Aug 2009
Posts: 19
Likes: 6
Squash dual pump users, Help needed Installing my new squash dual pump setup in my 02 camaro this weekend, the whole harness is pretty simple and straight forward on what goes where. So pretty much all I do is ground and power the relays. I did all that is needed but the pump(s) don't kick on. I grounded it directly to the battery and my battery has over 12v of charge.
To be sure it wasn't a fuse or relay I plug in my old harness into my old pump and it kicked on just fine.
I manually connected each new pump into the old harness connector and they both do kick on. I'm stumped, any ideas?
To be sure it wasn't a fuse or relay I plug in my old harness into my old pump and it kicked on just fine.
I manually connected each new pump into the old harness connector and they both do kick on. I'm stumped, any ideas?
