When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello all, I am currently camming my lq4 in my rx7 I am running a professional products intake ported and 102mm NW tb I have bought some injectors locally of a 16 6.0 pulled for cng conversion below is the injector I have rated at 50lb min @58 psi
This next picture coming up is the harness I have which is from a 2007 chevy express converted to standalone system
im not sure what connector I need to take my 07 harness to adapt to the 16 injector is there anyone out there that can tell me what I need and where to get them ? I prefer something short to keep it all clean
Hi, I have answered this before with the EV-1 to EV-14
You have the Truck Car connector.
The Adapter is $12.00 each.
The new Connector with terminals, PTS, is $3.00.
The "new connector" method IS shorter.
The labor time is about two minuets each connector.
Lance
Last edited by pantera_efi; 01-02-2017 at 11:58 AM.
Reason: "blind"
Hi, I have answered this before with the EV-1 to EV-14
You have the Truck Car connector.
The Adapter is $12.00 each.
The new Connector with terminals, PTS, is $3.00.
The "new connector" method IS shorter.
The labor time is about two minuets each connector.
Lance
http://www.ebay.com/itm/291480953108?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
i bought these for a fraction of the cost installed them they work great thanks for your help though hope this helps others as well
12-13-2016, 08:09 PM
What injector adaptor do I need ? 
