v6 to ls1 fuel problems
Thread Starter
Staging Lane
Joined: Jun 2004
Posts: 73
Likes: 0
v6 to ls1 fuel problems Im swapping a ls1 into my 95 v6 f body and need to know about the easiest route to establish a fuel system. i know the pumps are completely different cuz the tanks are(plastic VS metal) but with the return fuel line on the ls1 fuel rails it cahnges a lot...what should i do?...
Dave
Dave
PM Magnus
He used to have a 97 v6 and swaped a ls1 in. Here is his website http://www.dxsoftware.com/magnus/
also might wanna go to http://www.camarov6.com/cgi-bin/ultimatebb.cgi and search for swap info. magnus made some posts of what he did and needed when he did the swap. Also a few others have done the swap.
He used to have a 97 v6 and swaped a ls1 in. Here is his website http://www.dxsoftware.com/magnus/
also might wanna go to http://www.camarov6.com/cgi-bin/ultimatebb.cgi and search for swap info. magnus made some posts of what he did and needed when he did the swap. Also a few others have done the swap.
I just mounted a Walbro 255 ltr/hr high pressure pump in my '82 car gas tank. It will make 58psi all day long without breaking a sweat.
So...just dig around and find a Walbro pump that fits your fourth-gen.
www.racetronix.com or www.autoperformancenegineering.com or whatever
So...just dig around and find a Walbro pump that fits your fourth-gen.
www.racetronix.com or www.autoperformancenegineering.com or whatever
I just completed the same thing and I bought a modified fuel rail from street and performance ( I think it was around 175) but any way they will send you one with a return line added to it as well as a fuel regulator added on to it. Then I sent my LS1 underhood Wiring Harness to Dana at www.lt1350.com and he modified it so all i had to do was plug it into my 3.4 L body harness. I didnt have to drop my fuel tank and was able to keep my guages. the only 2 mods i had to make was adding a wire from the Battery to the block mounted on the passenger tire well and a wire from the second underhood harness to the second fan. He will even add the Diagnostic port to the Ls1 harness as well as adding a vats bypass
