Siemens Deka 80 install/tune
Siemens Deka 80 install/tune Can I install these and use HP tuners to modify the data so that car can be driven on and off trailer for tuner.
Car has Procharger D1x, cam and stall installed recently and I want to get it tuned. I was told I can't drive the car after installing 80s by Bob @ brute but I am wondering if i modify fuel data in hp that it would be okay to do it.
I found the attached data here on forums for the injectors. I am not 100% sure they are accurate though.
thanks in advance
Car has Procharger D1x, cam and stall installed recently and I want to get it tuned. I was told I can't drive the car after installing 80s by Bob @ brute but I am wondering if i modify fuel data in hp that it would be okay to do it.
I found the attached data here on forums for the injectors. I am not 100% sure they are accurate though.
thanks in advance
Restricted User
Joined: Mar 2014
Posts: 7,192
Likes: 109
From: Ohio
You're only asking about getting it to run to drive on/off the trailer. Screw the injector data. Change the injector flow rate to match the Deka 80s and it should fire up more than well enough to move.
