Fast 102, billet fuel rails hook up??
08-01-2018, 05:12 PM
#1
Teching In
Thread Starter
Join Date: Nov 2015
Location: Northern MN
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Fast 102, billet fuel rails hook up?? might be a dumb question but I’m finally getting back to throwing my car together after a rebuild and decided to go with fast 102 and nw 102 with fast fuel rails and the fuel line kit. Stock fuel system has return, this new sumysten has one line coming off the drivers side rail... wtf do I do with the return line hanging in the car, any pictures of fuel line set ups would be awesome thank you!!!
08-01-2018, 05:49 PM
#3
Teching In
Thread Starter
Join Date: Nov 2015
Location: Northern MN
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Motor is out of car, just looking at the incoming fuel lines from the car to the rails, two side by side a supply and a return it looks like, stock 98 system in car, I’ll take pictures later
08-01-2018, 07:32 PM
#5
Launching!
Join Date: Jan 2018
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
the hose with the silver end goes to the fitting on the hose joined to your new rails.
the other hose is for the purge canister. plug your purge canister solenoid back into it and tuck it out of the way.
the other hose is for the purge canister. plug your purge canister solenoid back into it and tuck it out of the way.
08-01-2018, 08:18 PM
#6
Teching In
Thread Starter
Join Date: Nov 2015
Location: Northern MN
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts