Hey, new here but I had a couple of questions for people who swapped the 93 to 97 LT1 fuel lines to braided, I have a 1995 LT1 Trans Am, I have 2 3/8 connectors and 2 5/16 connectors set as 6AN but I can not for the life of me figure out how what hose to get, their is a 3/8 hose 5/16 hose on the car do I just search for a basic 6AN hose to use for the 6AN connectors? Or does anyone have a link to the correct ones I should be using? Thank you!

 

Wouldn't this get more attention in the Gen I early LT forum?
This is the LS/laterLT forum.

 

As I mentioned, I'm new here so I have absolutely no idea what I'm doing

 

-6 hose is 3/8 or 6/16 of an inch
-5 hose is 5/16 of an inch

You can get -6 AN fittings with anywhere from -4 hose to -8 hose

Once you understand the SAE standards for various fluid connections, the rest is easy

 

OK. Look around a little more and you'll find the correct forum on this site where someone knowledgeable about early LT's will help you.